ToolkitRC Q6AC Charger AC 400W/DC 1000W 4CH output Built-in 65W USB A/TYPEC Output ,LiPo, 1-6S，NiMH 1-16S,PB 1-10S Charger IPS

Other functions
1. Firmware upgrade
After connecting the Q6AC to the computer with the
USB data cable in the box, the computer will recognize a
USB drive named Toolkit. Download the upgrade file
app.upga on the official website. To update copy and
past the new file and overwrite the files in the USB to
upgrade the firmware.
2. Automatically continue charging
When a battery is fully charged, after unplugging the
battery, connect to the next battery, the device will
automatically continue to charge, you can start and stop
this function in the settings menu.
3. Fan stepless speed regulation
When the internal temperature of the device exceeds
43°C or AC power supply, the power is greater than
100W, and the fan will increase the fan speed linearly
according to the internal temperature increase or power
increase. Make it less noisy when operating at low
temperatures or low power.
4, Wireless charging
Q6AC has built-in 15W wireless charging, only need to
place the device that supports wireless charging at the
top of the product wireless charging position, and will
automatically start charging.
5, USB fast charging
Q6AC built-in USB fast charging protocol, up to C port
up to 65W charging power, A port can support up to
30W. Supported protocols are PD, QC, AFC, FCP, SCP , PE,
SFCP, VOC. @ToolkitRC 2023 25
6. Manually calibrate the voltage
In the shutdown state, press and hold the [Scroll
Wheel] without releasing, connect the power supply, and
the system will enter the manual voltage calibration
function. Use a voltmeter to measure the actual voltage
of each battery, move the cursor to the corresponding
voltage value, modify the voltage value to be consistent
with the voltmeter value, and achieve calibration. After
the calibration is completed, move the cursor to save,
short press once, the buzzer will beep for a long time,
and the save is successful. Just exit or shut down.
7, Fully charged
When the lithium battery is fully charged, it will
prompt “Fast charging has ended”. If the battery is not
removed, the constant voltage trickle charge will be
performed automatically to keep the battery full.
Q6AC four channel independent output, automatic power distribution, total output power up to 1000W, AC/DC dual mode input, built-in 400W AC power supply, XT90 DC input, power up to 1000W, Magesafe magnetic suction wireless charging, slider design, compatible with XT60/XT30 optional,
Input voltage: AC 100-240V, maximum 100W 5.0A
DC 7.0-30.0v @ Max 50A
Battery type: Lipo LiHV LiFe Lion LTO @ 1-6S
NiMh @ 1-16S Pb @ 1-10S
Balance current: 800mA @ 4.2V
Charging power: 250W @ MAX 15A * 4
Discharge power: 250W @ MAX 15A recycling mode
12w @ 3A normal mode
USBA: 30w or upgrade firmware
USBC: Maximum [email protected]
PD QC PPS AFC FCP SCP PE SFCP
Product size: 220mm * 113mm * 82mm
Product weight: 1120g
Packaging size: 260 * 220 * 120 mm
Packaging weight: 1600g
Product Overview
Q6AC is a four channel balanced charger product with IPS highlighted display screen and more convenient operation of roller encoder.
1. Charging accuracy